Braindump2go Microsoft Exam 70-680 Updated For Free Download (46-60)

Latest 70-680 Questions and Answers from Microsoft Exam Center Offered by Braindump2go for Free Share Now! Read and remember all Real Questions Answers, Guaranteed Pass 70-680 Real Test 100% Or Full Money Back!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

Read more

Get Free PDF 70-680 Braindumps From Braindump2go – Guarantee 100% Pass 70-680 Exam (31-45)

Latest 70-680 Questions and Answers from Microsoft Exam Center Offered by Braindump2go for Free Share Now! Read and remember all Real Questions Answers, Guaranteed Pass 70-680 Real Test 100% Or Full Money Back!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

Read more

(LATEST) Microsoft 70-680 Exam Questions Newly Updaed By Braindump2go (16-30)

Real Latest 70-680 Exam Questions Updated By Official Microsoft Exam Center! Braindump2go Offers 70-680 Dumps sample questions for free download now! You also can visit our website, download our premium Microsoft 70-680 Exam Real Answers, 100% Exam Pass Guaranteed!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

Read more

(REAL EXAM ANSWERS) Braindump2go New Published 70-680 Exam Dumps Questions Free Download (1-15)

Real Latest 70-680 Exam Questions Updated By Official Microsoft Exam Center! Braindump2go Offers 70-680 Dumps sample questions for free download now! You also can visit our website, download our premium Microsoft 70-680 Exam Real Answers, 100% Exam Pass Guaranteed!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

Read more

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(111-120)!

QUESTION 111
The Aero Shake feature will work if which of the following conditions are met? Choose Two.

A.    A display adapter compatible with WDDM is installed.
B.    Aero features are downloaded from Microsoft.
C.    The windows experience index is at least 2.
D.    The Windows Experience Index is 3 or greater.

Answer: AD

QUESTION 112
You manage a computer that runs Windows 7. You are tasked to identify which applications were installed during the last week.
What Windows component would you use to find this information? Choose two.

A.    Check the Windows System Change Log in the Control Panel.
B.    View the events in the Applications Log under Windows Logs in the System and Security component
section of the Control Panel.
C.    Review the informational events from Reliability Monitor.
D.    Check the Windows System Diagnostics Report under the Performance Monitor MMC.

Answer: BC

QUESTION 113
Which of the following Windows 7 Editions allows you to join an Active Directory domain? Choose three.

A.    Windows Home Edition
B.    Windows Professional Edition
C.    Windows Ultimate Edition
D.    Windows Enterprise Edition

Answer: BCD
Explanation:
 clip_image002[3]

QUESTION 114
All the games including Titan Chess come with which versions of Windows 7? Choose two.

A.    Windows Home Edition
B.    Windows Professional Edition
C.    Windows Ultimate Edition
D.    Windows Enterprise Edition

Answer: CD

QUESTION 115
Which of the following is not a minimum requirement to install Windows 7?

A.    1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor
B.    4 GB RAM (32-bit)/2 GB RAM (64-bit)
C.    16 GB available disk space (32-bit)/20 GB (64-bit)
D.    DirectX 9 graphics processor with WDDM 1.0 or higher driver

Answer: B

QUESTION 116
Which of the following is not a rating for games in Windows 7?

A.    General Audience (G)
B.    Everyone (E)
C.    Teen (T)
D.    Adults Only (AO)

Answer: A

QUESTION 117
In Windows 7 you can control when users such as kids can login to Windows 7. Which of the following best describes where to configure this option?

A.    You cannot choose this feature unless you are connected to a domain.
B.    Go to the Start, Control Panel, User Accounts and Family Safety, Setup Parental Controls, and then
choose Time Restrictions.
C.    Go to Start, Control Panel. User Profiles, and then Time Restriction Settings.
D.    Go to the Homegroup settings and choose Offline Time Settings.

Answer: B

QUESTION 118
Which of the following best describes how the user is alerted with information system and configuration alerts?

A.    A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the
screen will not move.
B.    If Aero is installed the shaking alert flag appears in the index bar of every open window.
C.    A flag in the taskbar with a red “x” indicates there is a problem needing attention.
D.    All of the above.

Answer: C

QUESTION 119
If you have a router in the network your connected to and the Default Gateway is set to 192.168.1.1 and the subnet mask is 255.255.255.0, which of the following are useable IP addresses on that network?

A.    192.168.1.1
B.    192.168.1.300
C.    192.168.1.30
D.    192.168.2.10

Answer: C

QUESTION 120
Which of the following is true of Windows 7?

A.    MailCentral is included as the new default mail client with Windows 7.
B.    Outlook Express is included with Windows 7.
C.    Microsoft Outlook is included with Windows 7.
D.    There is no preinstalled mail client included with Windows 7.

Answer: D

Passing Microsoft 70-680 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-680 Dump: http://www.braindump2go.com/70-680.html

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(101-110)!

QUESTION 101
You manage a stand-alone computer which has only one partition. Windows 7 is run by this computer. The computer is shared by two users that are respectively named User1 and User2. User1 uses Encrypting File System (EFS) to encrypt a file. User1 tries to grant User2 access to the file as shown in the exhibit. (Click the Exhibit button.)
You have to make sure that User1 is able to grant User2 access to the file. What action should you perform to make sure of this?
 clip_image001[1]

A.    Instruct User2 to log on to the computer and take ownership of the file.
B.    Instruct User2 to log on to the computer and encrypt a file.
C.    Instruct User1 to export his certificate to a certificate (.cer) file.
D.    Instruct User1 to move the file to a shared folder on the computer.

Answer: B

QUESTION 102
You have a computer that runs Windows 7.
You need to configure the computer to download updates from a local Windows Server Update Services (WSUS) server. What should you do?

A.    From Windows Update, modify the Windows Update settings.
B.    From the local Group Policy, modify the Windows Update settings.
C.    From the System settings, modify the System Protection settings.
D.    From the local Group Policy, modify the Location and Sensors settings.

Answer: B

QUESTION 103
You plan to install Windows 7 by using a Windows 7 DVD. You need to perform an automated installation of Windows 7. What should you do?

A.    Create an answer file named oobe.xml. Copy the file to a network share.
B.    Create an answer file named winnt.sif. Place the file on a removable drive.
C.    Create an answer file named sysprep.inf. Copy the file to a network share.
D.    Create an answer file named autounattend.xml. Place the file on a removable drive.

Answer: D

QUESTION 104
You have a computer that runs Windows 7.
You perform an image backup. A virus infects the computer and causes the computer to become unresponsive. You need to restore the computer as quickly as possible. What should you do?

A.    Start the computer by using the Last Known Good Configuration feature.
B.    Start the computer from the Windows 7 DVD and then use the Startup Repair tool.
C.    Start the computer from the Windows 7 DVD and then use the System Image Recovery tool.
D.    Start the computer from Windows Preinstallation Environment (Windows PE) and then run Imagex.exe.

Answer: C

QUESTION 105
You have a computer that runs Windows 7. Multiple users log on to the computer. You need to deny one user access to removable devices on the computer. All other users must have access to the removable drives. What should you do?

A.    From the local Group Policy, modify an application control policy.
B.    From Control Panel, modify the BitLocker Drive Encryption settings.
C.    From Device Manager, modify the settings of all removable devices.
D.    From the local Group Policy, modify a removable storage access policy.

Answer: D

QUESTION 106
You have a computer that runs Windows 7. Your company has three custom applications named app1.exe, app2.exe, and app3.exe. The applications have been digitally signed by the company. You need to create a policy that allows only applications that have been digitally-signed by the company to run. What should you create?

A.    An AppLocker executable rule
B.    An AppLocker Windows Installer rule
C.    A software restriction policy and a certificate rule
D.    A software restriction policy and a hash rule

Answer: A

QUESTION 107
A user wants to install the games included with Windows 7 on his PC. They were not installed by default. Windows components can be added or removed using which of the following in Windows 7.

A.    Click the Start Bar, Control Panel, Add/Remove Programs, and click Windows Components.
B.    Click the Start Bar, Control Panel, Programs, then click Turn Windows features on or off.
C.    Click the Start Bar, Settings, Windows Control Center.
D.    Right-click the “My Computer” icon, Choose Properties, Choose Computer Management, on the left
pane choose Add Remove Windows Components.

Answer: B

QUESTION 108
You are installing Windows 7 on from the desktop of a Windows XP Professional PC. Which of the following can be performed from the Windows 7 DVD? Choose three.

A.    Run setup.exe from the DVD to start the Windows 7 installation.
B.    Use the autorun feature on the DVD to start the installation.
C.    Perform a full installation of Windows 7.
D.    Perform and upgrade of Windows 7 keeping all the Windows XP settings.

Answer: ABC

QUESTION 109
Federated Search connectors are installed using what method?

A.    Purchase the Federated Search Installation Tool Pack online and buying individual search connectors
from websites.
B.    Download an .osdx file from a valid source. Double click on the downloaded file and choose Add to install.
C.    Go to Microsoft’s website. Only vendors who have signed up with the Microsoft Federated Search Tool
Writers Guild can participate.
D.    Go to Amazon.com and download the Shared Resource Kit for Federated Searches.

Answer: B

QUESTION 110
Which of the following is not a volume type usable by Windows 7?

A.    FAT
B.    exFAT
C.    NTFS
D.    All of the above are volume types in Windows 7

Answer: D

Passing Microsoft 70-680 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-680 Dump:
http://www.braindump2go.com/70-680.html

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(91-100)!

QUESTION 91
Which of the following must you download from Microsoft’s Web site to obtain USMT 4.0?

A.    Windows Anytime Upgrade
B.    Windows Upgrade Advisor
C.    WAIK
D.    Microsoft Toolkit

Answer: C
Explanation:
User State Migration Tool
USMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState.

QUESTION 92
Which Windows Setup configuration pass applies settings to Windows 7 before Windows Welcome starts?

A.    OobeSystem
B.    AuditSystem
C.    Specialize
D.    OfflineServicing

Answer: A

QUESTION 93
You require fault tolerance for your operating system so that your computer running Windows 7 Home Premium can still boot up if a disk fails. You have two disks and unallocated space on your second disk. What should you do?

A.    Create a VHD and install an image of your computer on the VHD. Use BCDEdit to make the VHD bootable.
B.    Create a RAID-0 volume.
C.    Create a RAID-1 volume.
D.    Create a RAID-5 volume.

Answer: C

QUESTION 94
You have two computers on the same subnet. The computers have the IPv6 addresses shown in the following table:
 clip_image001
You need to test the connection to the IPv6 address from Computer1 to Computer2. Which command should you run?

A.    Ping -6 fe80::44df:1b68%12
B.    Ping -6 fe80::44df:1b68%10
C.    Ping -R fe80::44df:1b68%12
D.    Ping -R fe80::44df:1b68%10

Answer: B
Explanation:
If you are pinging from one host to another using link-local addresses, you also need to include your interface ID, for example ping
fe80::39cd:4c93%10.
The % character followed by a number after each IPv6 address is the interface ID. If you want to display the configuration of the IPv6 interfaces on the local computer, you can enter netsh interface ipv6 show address.
Ping -6
Force using IPv6.

QUESTION 95
You have a computer that runs Windows 7. IPv6 is disabled on the computer.
The computer has the following IPv4 settings:
– IP address: 10.1.1.193
– Subnet mask: 255.255.0.0
– Default gateway: 10.1.1.194
– Preferred DNS server: 10.1.1.195
You need to ensure that the computer can only communicate with computers on the local subnet. What should you do?

A.    Delete the default gateway address.
B.    Delete the preferred DNS server IP address.
C.    Configure the subnet mask to use 255.255.255.0.
D.    Configure the subnet mask to use 255.255.255.192.

Answer: A
Explanation:
Why gateways work
Default gateways are important to make IP routing work efficiently. In most cases, the router that acts as the default gateway for TCP/IP hosts–either a dedicated router or a computer that connects two or more network segments–maintains knowledge of other networks in the larger network and how to reach them. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger internetwork. If the default gateway fails, communication beyond the local network segment may be impaired. To prevent this, you can use the Advanced TCP/IP Settings dialog box (in Network Connections) for each connection to specify multiple default gateways. You can also use the route command to manually add routes to the routing table for heavily used hosts or networks.

QUESTION 96
You are running Windows 7 on a portable computer. A custom power plan named “On The Move” is optimized for battery life. The computer remains running when the portable computer is closed. You need to change a setting so that when you close the portable computer, it enters sleep mode. Which setting should you change? (To answer, select the appropriate setting in the work area.)
 clip_image002
Answer:
 clip_image002[6]

QUESTION 97
You have a computer that runs Windows 7. You need to modify the file extensions that are associated to Internet Explorer. What should you do?

A.    From Internet Explorer, click Tools and then click Manage Add-ons.
B.    From Control Panel, open Default Programs and then click Set Associations.
C.    From the local Group Policy, expand Computer Configuration and then click Software Settings.
D.    From Window Explorer, right-click %programfiles%\Internet Explorer\iexplore.exe and then click Properties.

Answer: B

QUESTION 98
You have a computer that runs Windows 7.
You run Ipconfig as shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can establish a DirectAccess connection to the network.
What should you do first?
 clip_image002[8]

A.    Create a new VPN connection.
B.    Configure a static IPv4 address.
C.    Enable IPv6 on the network adapter.
D.    Add an additional default gateway address.

Answer: C

QUESTION 99
You have a computer that runs Windows 7. You discover that an application named App1 runs during the startup process. You need to prevent only App1 from running during startup. Users must be allowed to run App1 manually. What should you do?

A.    From the local Group Policy, modify the application control policy.
B.    From the local Group Policy, modify the software restriction policy.
C.    From the System Configuration tool, select Diagnostic Startup.
D.    From the System Configuration tool, modify the Startup applications.

Answer: D

QUESTION 100
You are in charge of two computers that are respectively named Computer1 and Computer2. Computer1 runs Windows 7 and Computer2 runs Windows XP Professional.
On Computer1, you enable Remote Desktop as shown in the Remote Desktop exhibit. (Click the Exhibit button.)
 clip_image001[6]
Later you log on to Computer2 and try to connect to Computer1 by using Remote Desktop. The connection fails and you receive the error message shown in the Remote Desktop Disconnected exhibit. (Click the Exhibit button.)
 clip_image001[8]
You need to ensure, that you can connect to Computer1 by using Remote Desktop. What action should you perform?

A.    On Computer1, enable the Allow connections from computers running any version of Remote Desktop setting.
B.    On Computer2, assign the Client (Respond Only) IPSec policy.
C.    On Computer1, add your user account to the Remote Desktop Users group.
D.    On Computer2, create a firewall exception for the Remote Desktop Protocol (RDP).

Answer: A

Passing Microsoft 70-680 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-680 Dump:
http://www.braindump2go.com/70-680.html

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(81-90)!

QUESTION 81
Your company has a main office and a branch office. A portable computer runs Windows 7. On the computer, you configure a printer for each office.
You need to configure printing on the computer to meet the following requirements:
– When you are located in the main office, all documents must automatically print to the main office printer.
– When you are located in the branch office, all documents must automatically print to the branch office printer.
What should you do?

A.    From Location and Other Sensors, configure a default location.
B.    From Devices and Printer, configure the Manage Default Printers settings.
C.    From Region and Language, modify the Location settings.
D.    From Network and sharing Center, configure the network location.

Answer: B

QUESTION 82
You have a stand-alone computer that runs Windows 7. You open Windows Update as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can manually change the Windows Update settings on the computer. What should you do?
Windows Update (exhibit):
 clip_image002[13]
Windows Update (exhibit):
 clip_image002[15]

A.    Log on to Windows 7 as member of the Administrators group.
B.    From the local Group Policy, modify the Windows Update settings.
C.    Right-click Windows Update and select Run as administrator.
D.    Right-click the command prompt, select Run as administrator, and then run Wuapp.exe.

Answer: B
Explanation:
Configuring Automatic Updates by using local Group Policy
1. Click Start, and then click Run.
2. Type gpedit.msc, and then click OK.
3. Expand Computer Configuration.
4. Right-click Administrative Templates, and then click Add/Remove Templates.
5. Click Add, click Wuau.adm in the Windows\Inf folder, and then click Open.
6. Click Close.
7. Under Computer Configuration, expand Administrative Templates, expand Windows
 clip_image002[17]
Components, and then expand Windows Update.

QUESTION 83
You have a reference computer that runs Windows 7.
You plan to create an image of the computer and then deploy the image to 100 computers.
You need to prepare the reference computer for imaging. What should you do before you create the image?

A.    Run Package Manager.
B.    Run the System Preparation tool.
C.    Install the User State Migration Tool.
D.    Install Windows Automated Installation Kit.

Answer: B
Explanation:
Sysprep
Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows?XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged.

QUESTION 84
You have a standalone computer that runs Windows 7.
You need to prevent non-administrative users from using Device Manager. Users must be able to access Event Viewer. What should you do?

A.    From Control Panel, modify the default settings for media and devices.
B.    From Control Panel, modify the default settings for device installation.
C.    From the local computer policy, modify the application control policies.
D.    From the local computer policy, modify the Microsoft Management Console (MMC) settings.

Answer: D
Explanation:
Controlling MMC usage by using local Group Policy
To control MMC usage by using local Group Policy
11. Open MMC 3.0.
12. On the File menu, click Add/Remove Snap-in.
13. In the Available snap-ins list, click the Group Policy editor, and then click Add.
14. In the Select Group Policy Object wizard, use the default setting, Local Computer, in the Group Policy Object field.
15. Click Finish to close the Select Group Policy Object wizard.
16. By default, all available snap-in extensions are enabled. If you want to enable only certain extensions, highlight the snap-in in the Selected snap-ins list, and then click Edit Extensions.
17. By default, snap-ins load as child objects of the Console Root node. Click Advanced to modify this behavior and allow you to choose a different parent snap-in.
18. In the Add or Remove Snap-ins dialog box, click OK.
19. Before closing the new console, perform any of these procedures:
– To restrict access to author mode in MMC
– To restrict access to a permitted list of snap-ins
– To permit or restrict access to a snap-in

QUESTION 85
You have a computer that runs Windows 7 and Windows Internet Explorer 8.
A user named User1 attempts to access a Web page. User1 fails to access the Web page and receives an error message stating that the page does not have a rating. You need to configure Internet Explorer to allow User1 to access Web pages that do not have a rating. Which settings should you modify?

A.    Content Advisor
B.    InPrivate Filtering
C.    Parental Controls
D.    Restricted Sites

Answer: A
Explanation:
Using Content Advisor to help block inappropriate web content The Internet is a great resource for children, offering a wealth of information and experiences. However, it can also expose children to information that might not be appropriate for them. Content Advisor allows you to control the types of Internet content that can be viewed on your computer. Depending on how you configure it, Content Advisor uses ratings that websites voluntarily provide to block or allow certain content. Because not all websites are rated, unrated websites are automatically blocked (but you can choose to allow them). Once you’ve adjusted the settings and turn Content Advisor on, it checks websites as you visit them. To use Content Advisor, you first need to create the supervisor password, and then you can specify the filters and rules you want applied to your children’s web use. To change settings, you’ll need to log in with the supervisor password before you can make changes. The following procedures describe how to create or change your supervisor password, and how to make specific changes to control Internet use.
To allow unrated sites
By default, content advisor will block unrated websites. To allow unrated sites to be viewed, follow the steps below.
9. Click to open Internet Explorer.
10. Click the Tools button, and then click Internet Options.
11. Click the Content tab, and then, under Content Advisor, click Settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
12. In the Supervisor Password Required dialog box, type your password, and then click OK.
13. In the Content Advisor dialog box, click the General tab.
14. Under User options

QUESTION 86
Which of the following can be used to increase the physical memory on your Windows 7 PC and increase the speed?

A.    BranchCache
B.    Aero Glass
C.    DirectAccess
D.    ReadyBoost

Answer: D

QUESTION 87
To which of the following versions and editions of Windows 7 can you directly upgrade a computer running Windows Vista Enterprise (x86)?

A.    Windows 7 Home Professional (x86)
B.    Windows 7 Ultimate (x86)
C.    Windows 7 Ultimate (x64)
D.    Windows 7 Enterprise (x64)

Answer: B
Explanation:
Windows 7 Upgrade paths:
http://technet.microsoft.com/en-us/library/dd772579%28v=ws.10%29.aspx The only applicable solution is Windows 7 Enterprise (64-bit) as for the following reasons:
All versions are support Hardware wise.
Requirements:
Windows 7 Home Premium, Professional, Ultimate, and Enterprise editions have the following minimum hardware requirements:
1 GHz 32-bit (x86) or 64-bit (x64) processor
1 GB of system memory a 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available space a graphics adapter that supports DirectX 9 graphics, has a Windows Display Driver Model (WDDM) driver, Pixel Shader 2.0 hardware, and 32 bits per pixel and a minimum of 128 MB graphics memory XP Mode
Windows XP Mode is a downloadable compatibility option that is available for the Professional, Enterprise, and Ultimate editions of Windows 7. Windows XP Mode uses the latest version of Microsoft Virtual PC to allow you to run an installation of Windows XP virtually under Windows 7.
Use all of the installed memory
The x86 version supports a maximum of 4 GB of RAM, whereas the x64 version supports a maximum of 8 GB of RAM.
Windows 7 Professional
Windows 7 Professional is available from retailers and on new computers installed by manufacturers. It supports all the features available in Windows Home Premium, but you can join computers with this operating system installed to a domain. It supports EFS and Remote Desktop Host but does not support enterprise features such as AppLocker, DirectAccess, BitLocker, and BranchCache.
Windows 7 Enterprise and Ultimate Editions
The Windows 7 Enterprise and Ultimate editions are identical except for the fact that Windows 7 Enterprise is available only to Microsoft’s volume licensing customers, and Windows 7 Ultimate is available from retailers and on new computers installed by manufacturers. The Enterprise and Ultimate editions support all the features available in other Windows 7 editions but also support all the enterprise features such as EFS, Remote Desktop Host, AppLocker, DirectAccess, BitLocker, BranchCache, and Boot from VHD.

QUESTION 88
A user has a home computer with a cable Internet connection and no other computers on his home network. Which of the following methods can this person use to upgrade from Windows 7 Home Premium to Windows 7 Ultimate?

A.    Sysprep
B.    Windows PE
C.    WDS
D.    Windows Anytime Upgrade

Answer: D
Explanation:
Windows Anytime Upgrade
With Windows Anytime Upgrade, shown in Figure,you can purchase an upgrade to an application over the Internet and have the features unlocked automatically. This upgrade method is more suitable for home users and users in small businesses where a small number of intra-edition upgrades is required.
 clip_image002[19]

QUESTION 89
Which of the following tools can you use to determine if the applications installed on your computer running Windows Vista are known to have problems with Windows 7?

A.    Windows 7 Upgrade Advisor
B.    Sysprep
C.    USMT
D.    Windows PE

Answer: A
Explanation:
Windows 7 Upgrade Advisor
Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft’s Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista.
Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows 7.

QUESTION 90
Which of the following operating systems support an offline migration using USMT? Choose three.

A.    Windows 2000 Professional
B.    Windows XP Professional
C.    Windows Vista
D.    Windows 7

Answer: BCD

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(71-80)!

QUESTION 71
A company has client computers that run Windows 7. You create an AppLocker policy for the client computers.
You need to ensure that the AppLocker policy is enforced after the computers restart.
Which service startup type should you use? (To answer, select the appropriate setting or settings in the work area.)
 

_J)1YSX5}12OBI64I@@L{%9

Answer:
 clip_image001[4]

QUESTION 72
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise. The company also has a file server running Windows Server 2008 R2 that is configured to use BranchCache.
The branch office with the client computers has a slow network connection to the office with the file server. Users complain of poor performance when connecting to the file server from their client computers.
You need to verify that the client computers are configured to be BranchCache clients.
Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Device Manager
B.    The Local Users and Groups
C.    Share Permissions
D.    The Folder Properties window
E.    The Netsh command
F.    The Icacls command
G.    The Services Management console
H.    The Group Policy Management console
I.    The User Account Control Settings Control Panel window

Answer: EH
Explanation:
To enable BranchCache on Windows 7 client computers using Group Policy, you must first create a Group Policy object (GPO) that will carry the BranchCache configuration. After creating the GPO, you configure the setting that enables BranchCache and choose whether BranchCache will operate in Distributed Cache mode or Hosted Cache mode.
To create a GPO, enable BranchCache, and select the cache mode Click Start, point to Administrative Tools, and click Group Policy Management Console.
Client configuration using netsh
When configuring client computers, you can enable BranchCache and choose between Distributed Cache mode and Hosted Cache mode with a single netsh command.

QUESTION 73
You are running Windows 7 on a portable computer. A custom power plan named “On The Move” is optimized for battery life. The computer enters sleep mode when the portable computer is closed.
You need to change a setting so that when you close the portable computer, nothing happens. Which setting should you change? (To answer, select the appropriate setting in the work area.)
  clip_image002[1]
Answer:
 clip_image002[3]

QUESTION 74
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has a server running Windows Server 2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise.
You are preparing to capture an image of a Windows 7 client computer.
You need to ensure that the captured image is generic and does not contain the device drivers from the client computer.
What should you do?

A.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
B.    Run the Start /w ocsetup command.
C.    Run the PEImg /Prep command.
D.    Run the Dism command with the /Mount-Wim option.
E.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
F.    Run the Dism command with the /Add-Driver option.
G.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
H.    Run the BCDEdit /delete command.
I.    Run the ImageX command with the /mount parameter.
J.    Run the Dism command with the /Add-Package option.
K.    Add a boot image and create a capture image in WDS.
L.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
M.    Run the Diskpart command and the attach command option.

Answer: L
Explanation:
Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the Sysprep command with the /generalize option by specifying the PersistAllDeviceInstalls setting in the Microsoft-Windows- PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm).
http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx

QUESTION 75
You have upgraded a Windows XP system to Windows 7. One of the applications is not showing menus when you launch it under Windows 7.
How do you fix this issue? (To answer, select the appropriate setting in the work area.)
  clip_image001[6]
Answer:
 clip_image001[8]

QUESTION 76
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
You have a computer running Windows 7.
You create a VHD and install Windows 7 in it.
You reboot your system and notice that the boot menu now shows two installations of Windows 7.
How do you fix it?

A.    Use Sysprep with an answer file to disable one installation.
B.    Run the BCDEdit command.
C.    Run the Start /w ocsetup command.
D.    Run the Dism command.
E.    Add a boot image and create a capture image in WDS.
F.    Run the PEImg /prep command.
G.    Run the ImageX command with the /mount parameter.
H.    Run the Dism command with the /Mount-Wim option.
I.    Run the Dism command with the /Add-Package option.
J.    Run the Diskpart command and the attach command option.
K.    Add a boot image and create a capture image in WDS.

Answer: B
Explanation:
BCDEdit Command-Line Options
Boot Configuration Data (BCD) files provide a store that is used to describe boot applications and boot application settings. The objects and elements in the store effectively replace Boot.ini.
BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows, but with two major improvements:
BCDEdit exposes a wider range of boot options than Bootcfg.exe.
BCDEdit has improved scripting support.
Note
Administrative privileges are required to use BCDEdit to modify BCD. BCDEdit is the primary tool for editing the boot configuration of Windows Vista and later versions of Windows. It is included with the Windows Vista distribution in the %WINDIR%\System32 folder.
BCDEdit is limited to the standard data types and is designed primarily to perform single common changes to BCD. For more complex operations or nonstandard data types, consider using the BCD Windows Management
Instrumentation (WMI) application programming interface (API) to create more powerful and flexible custom tools.

QUESTION 77
A user is attempting to connect to a secure remote Microsoft SQL database on a computer running Windows 7 Professional. The computer communicates on port 1433. A rule in Windows Firewall with Advanced Security allows communication.
The user cannot connect to the database on the currently defined protocol due to an error in protocol type.
You need to ensure that users can connect to the database. Which setting should you choose? (To answer, select the appropriate setting in the work area.)
  clip_image001[10]
Answer:
clip_image001[12] 

QUESTION 78
A network contains computers that run Windows 7 and Windows Vista.
A computer named Computer1 runs Windows 7.
You need to ensure that only users running Windows 7 and Windows Vista can connect to Computer1 using Remote Desktop.
In the System Properties window, on the Remote tab, what should you do?

A.    Click the Advanced button. Select the Allow this computer to be controlled remotely check box on Computer1.
B.    Select the Allow connections only from computers running Remote Desktop with Network Level Authentication
(more secure) check box on Computer1.
C.    Select the Allow connections from computers running any version of Remote Desktop (less secure) check box
on Computed.
D.    Select the Allow Remote Assistance connections to this computer check box on Computer1.

Answer: B

QUESTION 79
You administer portable computers that have Windows 7 installed. The computers connect to a wireless network that uses WPA2- Enterprise Security. The company’s security policy requires multifactor authentication for the portable computers.
You need to manually configure each portable computer to meet the following requirements:
Users must provide multifactor authentication. The Server Certificate held on the portable computers must match the certificate held on the server.
What should you do? (To answer, configure the appropriate option or options in the dialog box in the answer area.)
  clip_image002[5]
Answer:
  clip_image002[9]
QUESTION 80
You administer Windows 7 Enterprise computers in your company network.
All computers are deployed from a single Windows image (.wim). You want to deploy the .wim file to newly purchased computers by Windows Deployment Services (WDS).
You need to protect an administrator account password used for deployment in an answer file. What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
  clip_image002[7]
Answer:

clip_image002[11]

Passing Microsoft 70-680 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-680 Dump:
http://www.braindump2go.com/70-680.html

Official 2014 Latest Microsoft 70-680 Exam Dump Free Download(61-70)!

QUESTION 61
You have a computer that runs Windows 7. The Encrypting File System (EFS) key is compromised. You need to create a new EFS key. Which command should you run?

A.    Certutil -GetKey
B.    Cipher.exe /k
C.    Lcacls.exe /r
D.    Syskey.exe

Answer: B
Explanation:
Cipher
Displays or alters the encryption of folders and files on NTFS volumes. Used without parameters, cipher displays the encryption state of the current folder and any files it contains.Administrators can use Cipher.exe to encrypt and decrypt data on drives that use the NTFS file system and to view the encryption status of files and folders from a command prompt. The updated version adds another security option. This new option is the ability to overwrite data that you have deleted so that it cannot be recovered and accessed.When you delete files or folders, the data is not initially removed from the hard disk. Instead, the space on the disk that was occupied by the deleted data is “deallocated.” After it is deallocated, the space is available for use when new data is written to the disk. Until the space is overwritten, it is possible to recover the deleted data by using a low-level disk editor or data-recovery software.If you create files in plain text and then encrypt them, Encrypting File System (EFS) makes a backup copy of the file so that, if an error occurs during the encryption process, the data is not lost. After the encryption is complete, the backup copy is deleted. As with other deleted files, the data is not completely removed until it has been overwritten. The new version of the Cipher utility is designed to prevent unauthorized recovery of such data.
/K Creates a new certificate and key for use with EFS. If this option is chosen, all the other options will be ignored. By default, /k creates a certificate and key that conform to current group plicy. If ECC is specified, a self-signed certificate will be created with the supplied key size. /R Generates an EFS recovery key and certificate, then writes them to a .PFX file (containing certificate and private key) and a .CER file (containing only the certificate). An administrator may add the contents of the .CER to the EFS recovery policy to create the recovery for users, and import the .PFX to recover individual files. If SMARTCARD is specified, then writes the recovery key and certificate to a smart card. A .CER file is generated (containing only the certificate). No .PFX file is genereated. By default, /R creates an 2048-bit RSA recovery key and certificate. If EECC is specified, it must be followed by a key size of 356, 384, or 521.

QUESTION 62
You have a portable computer that runs Windows 7. The computer is configured to keep an offline version of files located in a network share.
You need to identify whether you are working on an offline version of a file.
What should you do?

A.    From Sync Center, click View sync partnerships.
B.    From Action Center, click View archived messages.
C.    From Windows Explorer, select the file and then view the toolbar.
D.    From Windows Mobile Device Center, click the Connection settings.

Answer: C
Explanation:
To find out whether you’re working offline: Offline files turn on automatically if you lose your network connection. A copy of your file is copied to your computer, and once your network connection is re-established, the two copies will be synchronized. To find out if you’re working offline, do the following.
1. Open the network folder that contains the file you are working on.
2. Check the Details pane at the bottom of the window for the status. If the status is offline, you are working with a copy of the file on your computer. If the status in online, you are working with the file on the network.

QUESTION 63
You have a computer that runs Windows 7.
You mark a folder as Always available offline.
You need to verify that an offline copy of the folder has been created on the computer. What should you do?

A.    Open Sync Center and review the status.
B.    Open Action Center and review any messages or issues.
C.    Open Windows Mobile Device Center and review the status.
D.    Open Network and Sharing Center and review the status for the local area connection.

Answer: A
Explanation:
What is Sync Center?Sync Center allows you to check the results of your recent sync activity if you’ve set up your computer to sync files with a network server. This allows you to access copies of your network files even when your computer isn’t connected to the network. Sync Center can tell you if the files synced successfully or if there are any sync errors or warnings.
NoteSync Center is designed to help you sync with files in network locations. If you want to sync a mobile device with your computer, such as a mobile phone or portable music player, Windows gives you several other options. You can install the sync software that some manufacturers include with their device, or you can use the new Device Stage feature in this version of Windows if your device supports this feature. For more information, see Sync music, pictures, contacts, and calendars with a mobile device.

QUESTION 64
Your company has a server that runs Windows Server 2008 R2. The server is configured as a remote access server. The external firewall has TCP port 80 and TCP port 443 open for remote access connections.
You have a home computer that runs Windows 7.
You need to establish secure remote access connection from the home computer to the remote access server.
Which type of connection should you configure?

A.    IPSec
B.    L2TP
C.    PPTP
D.    SSTP

Answer: D
Explanation:
Secure Socket Tunneling Protocol
Secure Socket Tunneling Protocol (SSTP) is a new form of VPN tunnel with features that allow traffic to pass through firewalls that block PPTP and L2TP/IPsec traffic. SSTP provides a mechanism to encapsulate PPP traffic over the SSL channel of the HTTPS protocol. The use of PPP allows support for strong authentication methods such as EAP- TLS. The use of HTTPS means traffic will flow through TCP port 443, a port commonly used for Web access. Secure Sockets Layer (SSL) provides transport-level security with enhanced key negotiation, encryption, and integrity checking.

QUESTION 65
You have a computer that runs Windows 7.
You need to record when an incoming connection is allowed through Windows firewall.
What should you do?

A.    In Local Group Policy, modify the audit policy.
B.    In Local Group Policy, modify the system audit policy.
C.    From the Windows Firewall with Advanced Security properties, set the logging settings to Log successful
connections.
D.    From the Windows Firewall with Advanced Security properties, set the Data Protection (Quick Mode) IPSec
settings to Advanced.

Answer: C
Explanation:
Customize Logging Settings for a Firewall Profile
Windows Firewall with Advanced Security can be configured to log events that indicate the successes and failures of its processes. The logging settings involve two groups of settings: settings for the log file itself and settings that determine which events the file will record. The settings can be configured separately for each of the firewall profiles. You can specify where the log file will be created, how big the file can grow, and whether you want the log file to record information about dropped packets, successful connections, or both. Log successful connectionsUse this option to log when Windows Firewall with Advanced Security allows an inbound connection. The log records why and when the connection was formed. Look for entries with the word ALLOW in the action column of the log.

QUESTION 66
Your company has a server named Server1 that runs Windows Server 2008. Server1 is a Windows Server Update Services (WSUS) server. You have a computer named Computer1
that runs Windows 7. Computer1 is configured to obtain updates from Server1.
You open the WSUS snap-in on Server1 and discover that Computer1 does not appear.
You need to ensure that Computer1 appears in the WSUS snap-in. What should you do?

A.    On Server1, open Windows Update then select Check for updates.
B.    On Server1, run Wsusutil.exe and specify the /import parameter.
C.    On Computer1, open Windows Update and then select Change settings.
D.    On Computer1, run Wuauclt.exe and specify the /detectnow parameter.

Answer: D
Explanation:
wuauclt.exeThe wuauclt utility allows you some control over the functioning of the Windows Update Agent. It is updated as part of Windows Update.Detectnow OptionBecause waiting for detection to start can be a time-consuming process, an option has been added to allow you to initiate detection right away. On one of the computers with the new Automatic
Update client installed, run the following command at the command prompt:
wuauclt.exe /detectnow

QUESTION 67
You have a computer that runs Windows 7. Windows Update settings are configured as shown in the exhibit. (Click the Exhibit button.)
You discover that standard users are never notified when updates are available.
You need to ensure that standard users are notified when updates are available.
What should you do?
 clip_image002

A.    Select Allow all users to install updates on this computer.
B.    Specify an intranet Microsoft update service location in Group Policy.
C.    Change the Startup Type for the Windows Update service to Automatic.
D.    Select Give me recommended updates the same way I receive important updates.

Answer: A
Explanation:
Change how Windows installs or notifies you about updates You can set Windows to automatically install important and recommended updates or to install important updates only. Important updates provide significant benefits, such as improved security and reliability. Recommended updates can address noncritical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically. If you don’t want updates to be installed automatically, you can choose to be notified when updates apply to your computer instead. Then, you can download and install them yourself, or you can set Windows to automatically download updates, and then notify you so you can install them yourself. Here’s how to change how Windows installs or notifies you about updates:
1. Click to open Windows Update.
2. In the left pane, click Change settings.
3. Under Important updates, click one of the following:
4. To schedule your automatic updates, next to Install new updates, select the day and time you want updates to occur. – Install updates automatically (recommended)
– Download updates but let me choose whether to install them
– Check for updates but let me choose whether to download and install them
– Never check for updates (not recommended)
5. To get recommended updates for your computer, under Recommended updates, select the Give me recommended updates the same way I receive important updates check box.
6. To allow anyone using the computer to make updates, select the Allow all users to install updates on this computer check box. This applies only to updates and software that are installed manually; automatic updates will be installed regardless of the user.
7. Click OK. If you’re prompted for an administrator password or confirmation, type the password or provide confirmation.

QUESTION 68
You have a computer that runs Windows 7.
Your computer’s disk configuration is shown in the exhibit.
(Click the Exhibit button.)
You need to ensure that you can create a striped volume on the computer.
What should you do?
 clip_image002[4]

A.    Add an additional hard disk.
B.    Convert all disks to dynamic disks.
C.    Install a digitally-signed disk driver.
D.    Set the Startup Type of the Virtual Disk Service (VDS) to Automatic.

Answer: B
Explanation:
A striped volume is a dynamic volume that stores data in stripes on two or more physical disks. Data in a striped volume is allocated alternately and evenly (in stripes) across the disks. Striped volumes offer the best performance of all the volumes that are available in Windows, but they do not provide fault tolerance. If a disk in a striped volume fails, the data in the entire volume is lost.
You can create striped volumes only on dynamic disks. Striped volumes cannot be extended.
You can create a striped volume onto a maximum of 32 dynamic disks.
Backup Operator or Administrator is the minimum membership required to complete the actions below.
Creating a striped volume
Using the Windows interface
Using a command line
To create a striped volume using the Windows interface In Disk Management, right-click the unallocated space on one of the dynamic disks where you want to create the striped volume, and then click New Striped Volume….
Follow the instructions on your screen.
To create a striped volume using a command line
Open a command prompt and type diskpart.
At the DISKPART prompt, type list disk. Make note of the number of the disk where you want to create a striped volume.
At the DISKPART prompt, type create volume stripe [size=<size>] [disk=<disknumber>[,[<seconddisknumber>,
…]].

QUESTION 69
You have a computer that runs Windows 7. The computer is configured to automatically download and install updates. You install Microsoft Office 2007.
You need to ensure that service packs for Office are automatically installed.
What should you do?

A.    From Windows Update, select Restore hidden updates.
B.    From Windows Update, select Get updates for other Microsoft products.
C.    Create a folder named Updates in C:\Program Files\Microsoft Office. Install the Office Update Inventory
Tool into the Updates folder.
D.    Download and install the Office 2007 administrative template and disable the Block updates from the Office
Update Site from applying policy.

Answer: B
Explanation:
Use Windows Update to Check for Updates to other Microsoft Products By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update–a service for managing updates to Microsoft Office and several other Microsoft products–into Windows Update so that you no longer need to visit Office Online to get updates.If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”

QUESTION 70
You need to uninstall a Windows update from a computer that runs Windows 7. Which Control Panel item should you use?

A.    Administrative Tools
B.    Programs and Features
C.    Sync Center
D.    Troubleshooting

Answer: B

Passing Microsoft 70-680 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-680 Dump:
http://www.braindump2go.com/70-680.html

1 2